产品属性
| 品牌 | 现2C044VISHAY | 批号 | |
| 封装 | 仓库 |
交易说明：
- 592d108x96r3X2T20H
产品详情
- Low Profile, Low ESR, Conformal Coated, Maximum CV
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: -55 °C to +125 °C?
(above 85 °C, voltage derating is required)
Capacitance Range: 1 μF to 2200 μF?
Capacitance Tolerance: ± 10 %, ± 20 % standard?
Voltage Rating: 4 VDC to 50 VDC
FEATURES
? New robust ratings for pulsed applications
? 1.0 mm to 2.5 mm height
? Terminations: 100 % matte tin (2) standard,
tin/lead available
? Mounting: Surface mount
? 8 mm, 12 mm tape and reel packaging available per
EIA 481 and reeling per IEC 60286-3?
7" [178 mm] standard?
13" [330 mm] available
? Case code compatibility with EIA 535BAAC and CECC 30801
? See also 592W for additional ratings designs for pulsed
applications
? Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note?
* This datasheet provides information about parts that are?
RoHS-compliant and/or parts that are non-RoHS-compliant. For?
example, parts with lead (Pb) terminations are not RoHS-compliant.?
Please see the information/tables in this datasheet for details.
Note
? Preferred tolerance and reel sizes are in bold.?
We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance or lower
ESR (e.g., 591D series).
Available
Available
ORDERING INFORMATION
592D 106 X0 010 B 2 T 15H
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE
CODE
TERMINATION REEL SIZE AND
PACKAGING
SUFFIX
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
See
Ratings
and Case
Codes
table
2 = 100 % tin
4 = Gold plated
8 = Solder
plated 60/40
Special order
T = Tape and reel
7" [178 mm] reel
W = 13" [330 mm] reel
Maximum
height (mm)
see
Standard
Ratings
table
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 2 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
? The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]
(1) For package height, please refer to specific rating in the “Standard Ratings” table
DIMENSIONS in inches [millimeters]
CASE CODE L MAX. W A B D REF. J MAX.
A 0.146 [3.7]
0.071 ± 0.012
[1.8 ± 0.3]
0.031 ± 0.012
[0.8 ± 0.3]
0.087 ± 0.016
[2.2 ± 0.4]
0.114 [2.9] 0.004 [0.1]
B 0.157 [4.0] 0.110 + 0.012/- 0.016
[2.8 + 0.3/- 0.4]
0.031 ± 0.012
[0.8 ± 0.3]
0.098 ± 0.016
[2.5 ± 0.4]
0.138 [3.5] 0.004 [0.1]
C 0.28 [7.1]
0.126 ± 0.012
[3.2 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.173 ± 0.024
[4.4 ± 0.6]
0.236 [6.0] 0.004 [0.1]
D 0.295 [7.5]
0.169 ± 0.012
[4.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.181 ± 0.024
[4.6 ± 0.6]
0.252 [6.4] 0.004 [0.1]
M 0.295 [7.5]
0.248 ± 0.012
[6.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.200 ± 0.024
[5.1 ± 0.6]
0.264 [6.7] 0.004 [0.1]
R 0.283 [7.2]
0.236 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.051 ± 0.012
[1.3 ± 0.3]
0.181 ± 0.024
[4.6 ± 0.6]
0.244 [6.2] 0.004 [0.1]
S 0.138 [3.5]
0.063 ± 0.012
[1.6 ± 0.3]
0.031 ± 0.012
[0.8 ± 0.3]
0.079 ± 0.012
[2.0 ± 0.3]
0.087 [2.2] 0.004 [0.1]
X 0.571 [14.5]
0.290 + 0.010/- 0.020
[7.37 + 0.25/- 0.5]
0.051 ± 0.016
[1.3 ± 0.4]
0.469 ± 0.024
[11.9 ± 0.6]
0.52 [13.2] 0.004 [0.1]
RATINGS AND CASE CODES
μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
1.0 A/B B
1.5 B
2.2 A A/B B/C C
3.3 B/C C/D C
4.7 A A A/B C B/C/D/R C/R
6.8 A A/B B/C C/D D/R R
10 A A/B B/C B/C/D B/D/R R R
15 A/B B B/C/D C/D/R R
22 A/B A/B A/B/C B/C/D B/D/R
33 B A/B/C/S C/D B/C/D/R R C
47 C A/B/C/D B/D/R B/C/R D
68 B/C/D B/C/D/R B/C/D/R C/D R
100 A/B/C/D/R B/C/D/R B/C/D/R C/D R
120 C
150 B/C/D/R C/D/R C/D D/R
220 C/D/R C/D/R D/R R
330 C/D C/D/R D/R
470 C/D/R C/D/R
680 D/R R X
1000 R R/X
1500 X M/R/X
2200 X X
L
A
D B
MAX.
REF.
W
J J
H (1)
MAX. MAX.
Tantalum wire
nib identifies
anode (+)
terminal
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 3 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
HEIGHT
MAX.
(mm)
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(?)
MAX. RIPPLE
100 kHz
IRMS
(A)
4 VDC AT +85 °C; 2.7 VDC AT +125 °C
22 A 592D226(1)004A(2)(3)15H 1.5 0.9 6 2.400 0.16
22 B 592D226(1)004B(2)(3)15H 1.5 0.9 6 1.600 0.22
33 B 592D336(1)004B(2)(3)15H 1.5 1.3 6 1.600 0.22
47 C 592D476(1)004C(2)(3)15H 1.5 1.9 6 0.400 0.50
68 B 592D686(1)004B(2)(3)15H 1.5 2.7 6 1.400 0.24
68 C 592D686(1)004C(2)(3)15H 1.5 2.7 6 0.350 0.53
68 D 592D686(1)004D(2)(3)15H 1.5 2.7 6 0.270 0.68
100 A 592D107(1)004A(2)(3)12H 1.2 4.0 24 1.000 0.23
100 B 592D107(1)004B(2)(3)20H 2.0 4.0 8 0.450 0.42
100 C 592D107(1)004C(2)(3)15H 1.5 4.0 8 0.450 0.47
100 D 592D107(1)004D(2)(3)15H 1.5 4.0 8 0.350 0.60
100 R 592D107(1)004R(2)(3)15H 1.5 4.0 8 0.260 0.76
150 B 592D157(1)004B(2)(3)20H 2.0 6.0 8 0.450 0.42
150 C 592D157(1)004C(2)(3)15H 1.5 6.0 8 0.450 0.47
150 D 592D157(1)004D(2)(3)15H 1.5 6.0 8 0.360 0.59
150 R 592D157(1)004R(2)(3)15H 1.5 6.0 8 0.250 0.77
220 C 592D227(1)004C(2)(3)20H 2.0 8.8 8 0.200 0.74
220 D 592D227(1)004D(2)(3)15H 1.5 8.8 8 0.200 0.79
220 R 592D227(1)004R(2)(3)15H 1.5 8.8 8 0.190 0.89
330 C 592D337(1)004C(2)(3)20H 2.0 13.2 8 0.120 0.96
330 D 592D337(1)004D(2)(3)20H 2.0 13.2 8 0.120 1.02
470 C 592D477(1)004C(2)(3)20H 2.0 18.8 8 0.100 1.05
470 D 592D477(1)004D(2)(3)14H 1.4 18.8 8 0.140 0.93
470 D 592D477(1)004D(2)(3)15H 1.5 18.8 8 0.140 0.94
470 D 592D477(1)004D(2)(3)20H 2.0 18.8 8 0.100 1.18
470 R 592D477(1)004R(2)(3)20H 2.0 18.8 10 0.100 1.32
680 D 592D687(1)004D(2)(3)20H 2.0 27.2 12 0.100 1.18
680 R 592D687(1)004R(2)(3)20H 2.0 27.2 12 0.100 1.32
1000 R 592D108(1)004R(2)(3)20H 2.0 40.0 14 0.200 0.94
1500 X 592D158(1)004X(2)(3)20H 2.0 60.0 20 0.040 2.09
2200 X 592D228(1)004X(2)(3)20H 2.0 88.0 25 0.055 1.78
2200 X 592D228(1)004X(2)(3)25H 2.5 88.0 25 0.040 2.12
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
10 A 592D106(1)6R3A(2)(3)15H 1.5 0.6 6 2.700 0.15
15 A 592D156(1)6R3A(2)(3)15H 1.5 0.9 6 2.500 0.15
15 B 592D156(1)6R3B(2)(3)15H 1.5 0.9 6 1.700 0.22
22 A 592D226(1)6R3A(2)(3)10H 1.0 1.4 12 4.000 0.11
22 A 592D226(1)6R3A(2)(3)13H 1.3 1.4 6 1.500 0.19
22 A 592D226(1)6R3A(2)(3)15H 1.5 1.4 6 1.500 0.20
22 B 592D226(1)6R3B(2)(3)15H 1.5 1.4 6 1.500 0.23
33 A 592D336(1)6R3A(2)(3)15H 1.5 2.1 6 1.700 0.19
33 B 592D336(1)6R3B(2)(3)15H 1.5 2.1 6 1.400 0.24
33 C 592D336(1)6R3C(2)(3)15H 1.5 2.1 6 0.400 0.50
33 S 592D336(1)6R3S(2)(3)12H 1.2 2.1 10 2.000 0.17
47 A 592D476(1)6R3A(2)(3)13H 1.3 2.7 14 2.000 0.16
47 A 592D476(1)6R3A(2)(3)15H 1.5 2.7 14 2.000 0.17
47 B 592D476(1)6R3B(2)(3)12H 1.2 3.0 8 1.400 0.23
47 B 592D476(1)6R3B(2)(3)15H 1.5 3.0 8 1.400 0.24
Note
? Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T", for 13" reels specify “W”
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 4 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
47 C 592D476(1)6R3C(2)(3)15H 1.5 3.0 6 0.400 0.50
47 D 592D476(1)6R3D(2)(3)15H 1.5 3.0 6 0.300 0.65
68 B 592D686(1)6R3B(2)(3)13H 1.3 4.3 8 0.600 0.35
68 B 592D686(1)6R3B(2)(3)15H 1.5 4.3 8 0.600 0.37
68 B 592D686(1)6R3B(2)(3)20H 2.0 4.3 6 0.500 0.40
68 C 592D686(1)6R3C(2)(3)14H 1.4 4.3 6 0.380 0.51
68 C 592D686(1)6R3C(2)(3)15H 1.5 4.3 6 0.380 0.51
68 D 592D686(1)6R3D(2)(3)15H 1.5 4.3 6 0.270 0.68
68 R 592D686(1)6R3R(2)(3)15H 1.5 4.3 6 0.200 0.87
100 B 592D107(1)6R3B(2)(3)15H 1.5 6.3 8 1.000 0.28
100 B 592D107(1)6R3B(2)(3)20H 2.0 6.3 8 0.450 0.42
100 C 592D107(1)6R3C(2)(3)15H 1.5 6.3 8 0.380 0.51
100 D 592D107(1)6R3D(2)(3)15H 1.5 6.3 8 0.260 0.69
100 R 592D107(1)6R3R(2)(3)15H 1.5 6.3 8 0.200 0.87
120 C 592D127(1)6R3C(2)(3)20H 2.0 7.2 8 0.200 0.74
150 C 592D157(1)6R3C(2)(3)20H 2.0 9.5 8 0.190 0.76
150 D 592D157(1)6R3D(2)(3)15H 1.5 9.5 8 0.250 0.71
150 R 592D157(1)6R3R(2)(3)15H 1.5 9.5 8 0.200 0.87
220 C 592D227(1)6R3C(2)(3)18H 1.8 13.9 8 0.150 0.86
220 C 592D227(1)6R3C(2)(3)20H 2.0 13.9 8 0.150 0.86
220 D 592D227(1)6R3D(2)(3)15H 1.5 13.9 8 0.220 0.75
220 D 592D227(1)6R3D(2)(3)20H 2.0 13.9 8 0.120 1.08
220 R 592D227(1)6R3R(2)(3)15H 1.5 13.9 8 0.180 0.91
330 C 592D337(1)6R3C(2)(3)16H 1.6 20.8 10 0.150 0.82
330 C 592D337(1)6R3C(2)(3)20H 2.0 20.8 12 0.200 0.74
330 D 592D337(1)6R3D(2)(3)15H 1.5 20.8 8 0.120 1.02
330 D 592D337(1)6R3D(2)(3)16H 1.6 20.8 12 0.150 0.93
330 D 592D337(1)6R3D(2)(3)19H 1.9 20.8 8 0.100 1.18
330 D 592D337(1)6R3D(2)(3)20H 2.0 20.8 8 0.100 1.18
330 R 592D337(1)6R3R(2)(3)12H 1.2 20.8 10 0.180 0.87
330 R 592D337(1)6R3R(2)(3)15H 1.5 20.8 8 0.180 0.91
330 R 592D337(1)6R3R(2)(3)20H 2.0 20.8 8 0.100 1.32
470 C 592D477(1)6R3C(2)(3)16H 1.6 29.6 14 0.200 0.71
470 C 592D477(1)6R3C(2)(3)20H 2.0 29.6 14 0.100 1.05
470 D 592D477(1)6R3D(2)(3)20H 2.0 29.6 10 0.100 1.18
470 R 592D477(1)6R3R(2)(3)16H 1.6 29.6 10 0.120 1.37
470 R 592D477(1)6R3R(2)(3)20H 2.0 29.6 10 0.100 1.32
680 R 592D687(1)6R3R(2)(3)16H 1.6 42.8 10 0.100 1.25
680 R 592D687(1)6R3R(2)(3)20H 2.0 42.8 10 0.100 1.32
1000 R 592D108(1)6R3R(2)(3)20H 2.0 63.0 29 0.200 0.94
1000 R 592D108(1)6R3R(2)(3)22H 2.2 63.0 29 0.200 0.96
1000 X 592D108(1)6R3X(2)(3)20H 2.0 63.0 16 0.040 2.09
1500 M 592D158X06R3M(2)(3)20H 2.0 95.0 50 0.090 1.39
1500 R 592D158X06R3R(2)(3)20H 2.0 95.0 50 0.120 1.21
1500 X 592D158(1)6R3X(2)(3)16H 1.6 95.0 25 0.045 1.94
1500 X 592D158(1)6R3X(2)(3)20H 2.0 95.0 25 0.045 1.97
1500 X 592D158(1)6R3X(2)(3)25H 2.5 95.0 20 0.035 2.27
2200 X 592D228(1)6R3X(2)(3)20H 2.0 139.0 35 0.055 1.78
2200 X 592D228(1)6R3X(2)(3)21H 2.1 139.0 35 0.055 1.79
2200 X 592D228(1)6R3X(2)(3)22H 2.2 139.0 35 0.055 1.79
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
HEIGHT
MAX.
(mm)
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(?)
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
? Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T", for 13" reels specify “W”
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 5 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT +85 °C; 7 VDC AT +125 °C
4.7 A 592D475(1)010A(2)(3)15H 1.5 0.5 6 6.000 0.10
6.8 A 592D685(1)010A(2)(3)15H 1.5 0.7 6 6.000 0.10
10 A 592D106(1)010A(2)(3)15H 1.5 1.0 6 2.600 0.15
10 B 592D106(1)010B(2)(3)15H 1.5 1.0 6 1.700 0.22
15 B 592D156(1)010B(2)(3)15H 1.5 1.5 6 1.600 0.22
22 A 592D226(1)010A(2)(3)13H 1.3 2.2 6 1.500 0.19
22 B 592D226(1)010B(2)(3)13H 1.3 2.2 6 1.500 0.22
22 B 592D226(1)010B(2)(3)15H 1.5 2.2 6 1.500 0.23
22 C 592D226(1)010C(2)(3)15H 1.5 2.2 6 0.400 0.50
33 C 592D336(1)010C(2)(3)15H 1.5 3.3 6 0.400 0.50
33 D 592D336(1)010D(2)(3)15H 1.5 3.3 6 0.300 0.65
47 B 592D476(1)010B(2)(3)20H 2.0 4.7 6 0.500 0.40
47 D 592D476(1)010D(2)(3)15H 1.5 4.7 6 0.270 0.68
47 R 592D476(1)010R(2)(3)15H 1.5 4.7 6 0.200 0.87
68 B 592D686(1)010B(2)(3)20H 2.0 6.8 6 0.450 0.42
68 C 592D686(1)010C(2)(3)15H 1.5 6.8 6 0.240 0.65
68 D 592D686(1)010D(2)(3)15H 1.5 6.8 6 0.270 0.68
68 R 592D686(1)010R(2)(3)15H 1.5 6.8 6 0.200 0.87
100 B 592D107(1)010B(2)(3)20H 2.0 10.0 14 0.400 0.45
100 C 592D107(1)010C(2)(3)20H 2.0 10.0 8 0.190 0.76
100 D 592D107(1)010D(2)(3)13H 1.3 10.0 8 0.100 1.10
100 D 592D107(1)010D(2)(3)15H 1.5 10.0 8 0.100 1.12
100 R 592D107(1)010R(2)(3)15H 1.5 10.0 6 0.220 0.83
150 C 592D157(1)010C(2)(3)15H 1.5 15.0 8 0.170 0.77
150 C 592D157(1)010C(2)(3)20H 2.0 15.0 8 0.170 0.80
150 D 592D157(1)010D(2)(3)15H 1.5 15.0 8 0.250 0.71
150 D 592D157(1)010D(2)(3)20H 2.0 15.0 8 0.140 1.00
220 D 592D227(1)010D(2)(3)19H 1.9 22.0 8 0.120 1.08
220 D 592D227(1)010D(2)(3)20H 2.0 22.0 8 0.120 1.08
220 R 592D227(1)010R(2)(3)20H 2.0 22.0 8 0.100 1.32
330 D 592D337(1)010D(2)(3)20H 2.0 33.0 8 0.100 1.18
330 R 592D337(1)010R(2)(3)20H 2.0 33.0 8 0.100 1.32
680 X 592D687(1)010X(2)(3)20H 2.0 100.0 15 0.070 1.58
16 VDC AT +85 °C; 10 VDC AT +125 °C
4.7 A 592D475(1)016A(2)(3)15H 1.5 0.8 6 3.500 0.13
6.8 A 592D685(1)016A(2)(3)15H 1.5 1.1 6 3.300 0.13
6.8 B 592D685(1)016B(2)(3)15H 1.5 1.1 6 1.800 0.21
10 B 592D106(1)016B(2)(3)15H 1.5 1.6 6 1.600 0.22
10 C 592D106(1)016C(2)(3)15H 1.5 1.6 6 1.000 0.32
15 B 592D156(1)016B(2)(3)15H 1.5 2.4 6 1.400 0.24
15 C 592D156(1)016C(2)(3)15H 1.5 2.4 6 1.300 0.28
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
HEIGHT
MAX.
(mm)
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(?)
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
? Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T", for 13" reels specify “W”
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 6 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 VDC AT +85 °C; 10 VDC AT +125 °C
15 D 592D156(1)016D(2)(3)15H 1.5 2.4 6 0.500 0.50
22 B 592D226(1)016B(2)(3)20H 2.0 3.5 6 0.600 0.37
22 C 592D226(1)016C(2)(3)15H 1.5 3.5 6 0.300 0.58
22 D 592D226(1)016D(2)(3)15H 1.5 3.5 6 0.400 0.56
33 B 592D336(1)016B(2)(3)20H 2.0 5.3 6 0.600 0.37
33 C 592D336(1)016C(2)(3)15H 1.5 5.3 6 0.250 0.63
33 D 592D336(1)016D(2)(3)15H 1.5 5.3 6 0.300 0.65
33 R 592D336(1)016R(2)(3)15H 1.5 5.3 6 0.270 0.75
47 B 592D476(1)016B(2)(3)20H 2.0 7.5 6 0.720 0.33
47 C 592D476(1)016C(2)(3)16H 1.6 7.5 6 0.250 0.63
47 C 592D476(1)016C(2)(3)20H 2.0 7.5 6 0.250 0.66
47 R 592D476(1)016R(2)(3)15H 1.5 7.5 6 0.250 0.77
68 C 592D686(1)016C(2)(3)12H 1.2 10.9 6 0.500 0.43
68 C 592D686(1)016C(2)(3)15H 1.5 10.9 6 0.500 0.45
68 C 592D686(1)016C(2)(3)20H 2.0 10.9 6 0.250 0.66
68 D 592D686(1)016D(2)(3)20H 2.0 10.9 6 0.170 0.91
100 C 592D107(1)016C(2)(3)20H 2.0 16.0 8 0.150 0.86
100 C 592D107(1)016C(2)(3)20H 2.0 16.0 8 0.150 0.86
100 D 592D107(1)016D(2)(3)15H 1.5 16.0 8 0.150 0.91
100 D 592D107(1)016D(2)(3)20H 2.0 16.0 8 0.150 0.97
150 D 592D157(1)016D(2)(3)20H 2.0 24.0 8 0.100 1.18
150 R 592D157(1)016R(2)(3)20H 2.0 24.0 8 0.100 1.32
220 R 592D227(1)016R(2)(3)20H 2.0 35.2 10 0.120 1.21
20 VDC AT +85 °C; 13 VDC AT +125 °C
2.2 A 592D225(1)020A(2)(3)15H 1.5 0.5 6 6.000 0.10
4.7 A 592D475(1)020A(2)(3)15H 1.5 0.9 6 3.800 0.13
4.7 B 592D475(1)020B(2)(3)15H 1.5 0.9 6 3.200 0.16
6.8 B 592D685(1)020B(2)(3)15H 1.5 1.4 6 3.100 0.16
6.8 C 592D685(1)020C(2)(3)15H 1.5 1.4 6 1.100 0.30
10 B 592D106(1)020B(2)(3)15H 1.5 2.0 6 3.000 0.16
10 C 592D106(1)020C(2)(3)15H 1.5 2.0 6 1.300 0.28
10 D 592D106(1)020D(2)(3)15H 1.5 2.0 6 0.500 0.50
15 C 592D156(1)020C(2)(3)15H 1.5 3.0 6 0.600 0.41
15 D 592D156(1)020D(2)(3)15H 1.5 3.0 6 1.260 0.31
15 R 592D156(1)020R(2)(3)15H 1.5 3.0 6 0.400 0.61
22 B 592D226(1)020B(2)(3)20H 2.0 4.4 6 0.600 0.37
22 D 592D226(1)020D(2)(3)15H 1.5 4.4 6 0.400 0.56
22 R 592D226(1)020R(2)(3)15H 1.5 4.4 6 0.280 0.73
33 R 592D336(1)020R(2)(3)15H 1.5 6.6 6 0.280 0.73
100 R 592D107(1)020R(2)(3)20H 2.0 20.0 10 0.200 1.32
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
HEIGHT
MAX.
(mm)
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(?)
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
? Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T", for 13" reels specify “W”
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 7 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT +85 °C; 17 VDC AT +125 °C
2.2 A 592D225(1)025A(2)(3)15H 1.5 0.6 6 8.000 0.09
2.2 B 592D225(1)025B(2)(3)15H 1.5 0.6 6 6.000 0.12
3.3 B 592D335(1)025B(2)(3)15H 1.5 0.8 6 5.600 0.12
3.3 C 592D335(1)025C(2)(3)15H 1.5 0.8 6 2.000 0.22
4.7 C 592D475(1)025C(2)(3)15H 1.5 1.2 6 1.600 0.25
6.8 C 592D685(1)025C(2)(3)15H 1.5 1.7 6 1.300 0.28
6.8 D 592D685(1)025D(2)(3)15H 1.5 1.7 6 1.300 0.31
10 B 592D106X0025B(2)(3)15H 1.5 2.5 6 2.000 0.20
10 D 592D106(1)025D(2)(3)15H 1.5 2.5 6 1.200 0.32
10 R 592D106(1)025R(2)(3)15H 1.5 2.5 6 0.480 0.56
15 R 592D156(1)025R(2)(3)15H 1.5 3.8 6 0.400 0.61
33 C 592D336(1)025C(2)(3)16H 1.6 8.3 6 0.400 0.50
33 C 592D336(1)025C(2)(3)20H 2.0 8.3 6 0.400 0.52
47 D 592D476(1)025D(2)(3)20H 2.0 11.8 8 0.300 0.68
68 R 592D686(1)025R(2)(3)20H 2.0 17.0 8 0.230 0.87
35 VDC AT +85 °C; 23 VDC AT +125 °C
1.0 A 592D105(1)035A(2)(3)15H 1.5 0.5 4 10.000 0.08
1.0 B 592D105(1)035B(2)(3)15H 1.5 0.5 4 6.500 0.11
1.5 B 592D155(1)035B(2)(3)15H 1.5 0.5 4 4.200 0.14
2.2 B 592D225(1)035B(2)(3)15H 1.5 0.8 6 6.000 0.12
2.2 C 592D225(1)035C(2)(3)15H 1.5 0.8 6 3.500 0.17
3.3 C 592D335(1)035C(2)(3)15H 1.5 1.2 6 3.200 0.18
3.3 D 592D335(1)035D(2)(3)15H 1.5 1.2 6 2.100 0.24
4.7 B 592D475(1)035B(2)(3)15H 1.5 1.6 6 1.600 0.22
4.7 C 592D475(1)035C(2)(3)15H 1.5 1.6 6 2.800 0.19
4.7 D 592D475(1)035D(2)(3)15H 1.5 1.6 6 1.800 0.26
4.7 R 592D475(1)035R(2)(3)15H 1.5 1.6 6 1.300 0.34
6.8 D 592D685(1)035D(2)(3)15H 1.5 2.4 6 1.300 0.31
6.8 R 592D685(1)035R(2)(3)15H 1.5 2.4 6 1.200 0.35
10 R 592D106(1)035R(2)(3)15H 1.5 3.5 6 1.200 0.35
50 VDC AT +85 °C; 33 VDC AT +125 °C
1.0 B 592D105(1)050B(2)(3)15H 1.5 0.8 6 6.500 0.11
2.2 C 592D225(1)050C(2)(3)15H 1.5 1.1 6 0.800 0.35
3.3 C 592D335(1)050C(2)(3)15H 1.5 1.7 6 0.800 0.35
4.7 C 592D475(1)050C(2)(3)20H 2.0 2.4 6 0.800 0.37
4.7 R 592D475(1)050R(2)(3)15H 1.5 2.4 6 0.700 0.50
6.8 R 592D685(1)050R(2)(3)15H 1.5 3.4 6 0.700 0.50
10 R 592D106(1)050R(2)(3)20H 2.0 5.0 6 0.700 0.50
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
HEIGHT
MAX.
(mm)
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(?)
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
? Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T", for 13" reels specify “W”
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 8 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below +85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.6
10 6.0
16 10
20 12
25 15
35 24
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
CASE CODE/PART NUMBER X-REF
OLD NEW
A2_ A2_15H
B2_ B2_15H
C2_ C2_15H
D2_ D2_15H
R2_ R2_15H
S2_ S2_13H
T2_ B2_20H
U2_ C2_20H
V2_ D2_20H
W2_ R2_20H
X2_ X2_20H
Y2_ X2_25H
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 9 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CURVES AT +25 °C, IMPEDANCE AND ESR VS. FREQUENCY
“A” CASE
10 000
1000
100
10
0.1
1
FREQUENCY
IMPEDANCE
ESR
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
1 μF, 35 V
15 μF, 6.3 V
“B” CASE
10 000
1000
100
10
0.1
1
FREQUENCY
IMPEDANCE
ESR
4.7 μF, 20 V
10 μF, 10 V
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
“C” CASE
10 000
1000
100
10
0.1
1
FREQUENCY
IMPEDANCE
ESR
4.7 μF, 25 V
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
33 μF, 6.3 V
“D” CASE
1000
100
10
0.01
0.1
1
FREQUENCY
IMPEDANCE
ESR
6.8 μF, 25 V
47 μF, 6.3 V
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
“R” CASE
1000
100
10
0.01
0.1
1
FREQUENCY
IMPEDANCE
ESR
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
10 μF, 25 V
100 μF, 6.3 V
“S” CASE
1000
100
10
0.01
0.1
1
FREQUENCY
IMPEDANCE
ESR
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz
33 μF, 6.3 V
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 10 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POWER DISSIPATION
CASE CODE HEIGHT MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR
A 10H 0.050
A 12H 0.055
A 13H 0.055
A 15H 0.060
B 12H 0.075
B 13H 0.075
B 15H 0.080
B 20H 0.085
C 12H 0.095
C 14H 0.100
C 15H 0.100
C 16H 0.100
C 18H 0.110
C 20H 0.110
D 13H 0.120
TYPICAL CURVES AT +25 °C, IMPEDANCE AND ESR VS. FREQUENCY
592D 1500-4 V X/20H CASE
10
0.01
0.1
1
FREQUENCY
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
IMPEDANCE
ESR
592D 1500-6.4 V X/25H CASE
10
0.01
0.1
1
FREQUENCY
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
IMPEDANCE
ESR
592D 1000-6.3 V X/20H CASE
10
0.01
0.1
1
FREQUENCY
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
IMPEDANCE
ESR
592D 2200-4 V X/25H CASE
10
0.01
0.1
1
FREQUENCY
Ω
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
IMPEDANCE
ESR
592D
www.vishay.com Vishay Sprague
Revision: 24-Feb-14 11 Document Number: 40004
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D 14H 0.120
D 15H 0.125
D 16H 0.130
D 19H 0.140
D 20H 0.140
M 20H 0.175
R 12H 0.135
R 15H 0.150
R 16H 0.155
R 20H 0.175
R 22H 0.185
S 12H 0.060
X 16H 0.170
X 20H 0.175
X 21H 0.175
X 22H 0.175
X 25H 0.180
STANDARD PACKAGING QUANTITY
CASE CODE HEIGHT
UNITS PER REEL
7" REEL 13" REEL
A Any 2500 10 000
B Any 2000 8000
C Any 1000 4000
D Any 1000 4000
M 20H 1000 2500
R 12H; 15H 1000 4000
R 16H; 18H; 20H 1000 2500
S 12H 2500 10 000
X Any 500 n/a
PRODUCT INFORMATION
Conformal Coated Guide
Pad Dimensions www.vishay.com/doc?40150
Packaging Dimensions
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
POWER DISSIPATION
CASE CODE HEIGHT MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR
Typical Performance Characteristics
www.vishay.com Vishay Sprague
Revision: 03-Feb-14 1 Document Number: 40088
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Typical Performance Characteristics Tantalum Capacitors
Notes
? All information presented in this document reflects typical performance characteristics.
(1) Capacitance values 15 μF and higher.
(2) For 293D and TR3 only.
CAPACITOR ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM PERFORMANCE CHARACTERISTICS
Category temperature range -55 °C to +85 °C (to +125 °C with voltage derating)
Capacitance tolerance ± 20 %, ± 10 % (at 120 Hz) 2 VRMS (max.) at +25 °C using a capacitance bridge
Dissipation factor Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz
ESR Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz
Leakage current After application of rated voltage applied to capacitors for 5 min using a steady source of power with
1 k? resistor in series with the capacitor under test, leakage current at 25 °C is not more than 0.01 CV or
0.5 μA, whichever is greater. Note that the leakage current varies with temperature and applied voltage.
See graph below for the appropriate adjustment factor.
Capacitance change by
temperature
?
+12 % max. (at +125 °C) ?
+10 % max. (at +85 °C)?
-10 % max. (at -55 °C)
For capacitance value > 300 μF?
+20 % max. (at +125 °C)?
+15 % max. (at +85 °C)?
-15 % max. (at -55 °C)
Reverse voltage Capacitors are capable of withstanding peak voltages in the reverse direction equal to:?
10 % of the DC rating at +25 °C?
5 % of the DC rating at +85 °C?
Vishay does not recommend intentional or repetitive application of reverse voltage
Temperature derating If capacitors are to be used at temperatures above +25 °C, the permissible RMS ripple current or voltage
shall be calculated using the derating factors:?
1.0 at +25 °C?
0.9 at +85 °C?
0.4 at +125 °C
Operating temperature +85 °C +125 °C
RATED VOLTAGE
(V)
SURGE VOLTAGE
(V)
RATED VOLTAGE
(V)
SURGE VOLTAGE
(V)
4 5.2 2.7 3.4
6.3 8 4 5
10 13 7 8
16 20 10 12
20 26 13 16
25 32 17 20
35 46 23 28
50 65 33 40
50 (1) 60 33 40
63 76 42 50
75 (2) 75 50 50
Typical Performance Characteristics
www.vishay.com Vishay Sprague
Revision: 03-Feb-14 2 Document Number: 40088
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
? At +25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table.
? At +85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table.
? At +125 °C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings table.
TYPICAL LEAKAGE CURRENT FACTOR RANGE
CAPACITOR PERFORMANCE CHARACTERISTICS
ITEM PERFORMANCE CHARACTERISTICS
Surge voltage Post application of surge voltage (as specified in the table above) in series with a 33 ? resistor at the rate of 30 s
ON, 30 s OFF, for 1000 successive test cycles at 85 °C, capacitors meet the characteristics requirements listed
below.
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
Surge current After subjecting parts in series with a 1 ? resistor at the rate of 3 s CHARGE, 3 s DISCHARGE, and a cap bank of
100K μF for 3 successive test cycles at 25 °C, capacitors meet the characteristics requirements listed below.
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
Life test at +85 °C Capacitors meet the characteristic requirements listed below. After 2000 h application of rated voltage at 85 °C.
Capacitance change?
Leakage current
Within ± 10 % of initial value?
Shall not exceed 125 % of initial value
Life test at +125 °C Capacitors meet the characteristic requirements listed below. After 1000 h application 2/3 of rated voltage at 125 °C.
Capacitance change?
for parts with cap. ? 600 μF?
for parts with cap. > 600 μF?
Leakage current
Within ± 10 % of initial value?
Within ± 20 % of initial value?
Shall not exceed 125 % of initial value
Leakage Current Factor
Percent of Rated Voltage
100
10
1.0
0.1
0.01
0.001
0 10 20 30 40 50 60 70 80 90 100
+ 125 °C
+ 85 °C
+ 55 °C
+ 25 °C
- 55 °C
+ 150 °C
0 °C
Typical Performance Characteristics
www.vishay.com Vishay Sprague
Revision: 03-Feb-14 3 Document Number: 40088
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CAPACITOR ENVIRONMENTAL CHARACTERISTICS
ITEM CONDITION ENVIRONMENTAL CHARACTERISTICS
Humidity tests At 40 °C/90 % RH 1000 h, no voltage applied.? Capacitance change?
Cap. ? 600 μF?
Cap. > 600 μF?
Dissipation factor
?
Within ± 10 % of initial value?
Within ± 20 % of initial value?
Not to exceed 150 % of initial ?
+25 °C requirement
Temperature cycles At -55 °C/+125 °C, 30 min each, for 5 cycles. Capacitance change?
Cap. ? 600 μF?
Cap. > 600 μF?
Dissipation factor?
Leakage current
?
Within ± 10 % of initial value?
Within ± 20 % of initial value?
Initial specified value or less?
Initial specified value or less
Moisture resistance MIL-STD-202, method 106 at rated voltage,
42 cycles.
Capacitance change?
Cap. ? 600 μF?
Cap. > 600 μF?
Dissipation factor?
Leakage current
?
Within ± 10 % of initial value?
Within ± 20 % of initial value?
Initial specified value or less?
Initial specified value or less
Thermal shock Capacitors are subjected to 5 cycles of the
following:?
-55 °C (+0 °C, -5 °C) for 30 min, then?
+25 °C (+10 °C, -5 °C) for 5 min, then?
+125 °C (+3 °C, -0 °C) for 30 min, then?
+25 °C (+10 °C, -5 °C) for 5 min
Capacitance change?
Cap. ? 600 μF?
Cap. > 600 μF?
Dissipation factor?
Leakage current
?
Within ± 10 % of initial value?
Within ± 20 % of initial value?
Initial specified value or less?
Initial specified value or less
MECHANICAL PERFORMANCE CHARACTERISTICS
TEST CONDITION CONDITION POST TEST PERFORMANCE
Shear test Apply a pressure load of 5 N for 10 s ± 1 s
horizontally to the center of capacitor side body.
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Substrate bend With parts soldered onto substrate test board,
apply force to the test board for a deflection
of 3 mm, for a total of 3 bends at a rate of 1 mm/s.
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
Vibration MIL-STD-202, method 204, condition D, 10 Hz to
2000 Hz, 20 g peak
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Shock MIL-STD-202, method 213B shock (specified
pulse), condition I, 100 g peak
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solder heat ? Recommended reflow profiles temperatures
and durations are located within the Capacitor
Series Guides
? Pb-free and lead-bearing series caps are
backward and forward compatible
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Solderability MIL-STD-2002, method 208, ANSI/J-STD-002,
test B. Applies only to solder and tin plated
terminations.?
Does not apply to gold terminations.
Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solvents MIL-STD-202, method 215 Capacitance change?
Dissipation factor?
Leakage current
Within ± 10 % of initial value?
Initial specified value or less?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Flammability Encapsulent materials meet UL 94 V-0 with an
oxygen index of 32 %.
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 1 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Guide for Conformal Coated Tantalum Capacitors
INTRODUCTION
Tantalum electrolytic capacitors are the preferred choice in
applications where volumetric efficiency, stable electrical
parameters, high reliability, and long service life are primary
considerations. The stability and resistance to elevated
temperatures of the tantalum/tantalum oxide/manganese
dioxide system make solid tantalum capacitors an
appropriate choice for today's surface mount assembly
technology.
Vishay Sprague has been a pioneer and leader in this field,
producing a large variety of tantalum capacitor types for
consumer, industrial, automotive, military, and aerospace
electronic applications.
Tantalum is not found in its pure state. Rather, it is
commonly found in a number of oxide minerals, often in
combination with Columbium ore. This combination is
known as “tantalite” when its contents are more than
one-half tantalum. Important sources of tantalite include
Australia, Brazil, Canada, China, and several African
countries. Synthetic tantalite concentrates produced from
tin slags in Thailand, Malaysia, and Brazil are also a
significant raw material for tantalum production.
Electronic applications, and particularly capacitors,
consume the largest share of world tantalum production.
Other important applications for tantalum include cutting
tools (tantalum carbide), high temperature super alloys,
chemical processing equipment, medical implants, and
military ordnance.
Vishay Sprague is a major user of tantalum materials in the
form of powder and wire for capacitor elements and rod and
sheet for high temperature vacuum processing.
THE BASICS OF TANTALUM CAPACITORS
Most metals form crystalline oxides which are
non-protecting, such as rust on iron or black oxide on
copper. A few metals form dense, stable, tightly adhering,
electrically insulating oxides. These are the so-called “valve”
metals and include titanium, zirconium, niobium, tantalum,
hafnium, and aluminum. Only a few of these permit the
accurate control of oxide thickness by electrochemical
means. Of these, the most valuable for the electronics
industry are aluminum and tantalum.
Capacitors are basic to all kinds of electrical equipment,
from radios and television sets to missile controls and
automobile ignitions. Their function is to store an electrical
charge for later use.
Capacitors consist of two conducting surfaces, usually
metal plates, whose function is to conduct electricity. They
are separated by an insulating material or dielectric. The
dielectric used in all tantalum electrolytic capacitors is
tantalum pentoxide.
Tantalum pentoxide compound possesses high-dielectric
strength and a high-dielectric constant. As capacitors are
being manufactured, a film of tantalum pentoxide is applied
to their electrodes by means of an electrolytic process. The
film is applied in various thicknesses and at various voltages
and although transparent to begin with, it takes on different
colors as light refracts through it. This coloring occurs on the
tantalum electrodes of all types of tantalum capacitors.
Rating for rating, tantalum capacitors tend to have as much
as three times better capacitance/volume efficiency than
aluminum electrolytic capacitors. An approximation of the
capacitance/volume efficiency of other types of capacitors
may be inferred from the following table, which shows the
dielectric constant ranges of the various materials used in
each type. Note that tantalum pentoxide has a dielectric
constant of 26, some three times greater than that of
aluminum oxide. This, in addition to the fact that extremely
thin films can be deposited during the electrolytic process
mentioned earlier, makes the tantalum capacitor extremely
efficient with respect to the number of microfarads available
per unit volume. The capacitance of any capacitor is
determined by the surface area of the two conducting
plates, the distance between the plates, and the dielectric
constant of the insulating material between the plates.
In the tantalum electrolytic capacitor, the distance between
the plates is very small since it is only the thickness of the
tantalum pentoxide film. As the dielectric constant of the
tantalum pentoxide is high, the capacitance of a tantalum
capacitor is high if the area of the plates is large:
where
C = Capacitance
e = Dielectric constant
A = Surface area of the dielectric
t = Thickness of the dielectric
Tantalum capacitors contain either liquid or solid
electrolytes. In solid electrolyte capacitors, a dry material
(manganese dioxide) forms the cathode plate. A tantalum
lead is embedded in or welded to the pellet, which is in turn
connected to a termination or lead wire. The drawings show
the construction details of the surface mount types of
tantalum capacitors shown in this catalog.
COMPARISON OF CAPACITOR?
DIELECTRIC CONSTANTS
DIELECTRIC e
DIELECTRIC CONSTANT
Air or vacuum 1.0
Paper 2.0 to 6.0
Plastic 2.1 to 6.0
Mineral oil 2.2 to 2.3
Silicone oil 2.7 to 2.8
Quartz 3.8 to 4.4
Glass 4.8 to 8.0
Porcelain 5.1 to 5.9
Mica 5.4 to 8.7
Aluminum oxide 8.4
Tantalum pentoxide 26
Ceramic 12 to 400K
C eA
t
= -------
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 2 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SOLID ELECTROLYTE TANTALUM CAPACITORS
Solid electrolyte capacitors contain manganese dioxide,
which is formed on the tantalum pentoxide dielectric layer
by impregnating the pellet with a solution of manganous
nitrate. The pellet is then heated in an oven, and the
manganous nitrate is converted to manganese dioxide.
The pellet is next coated with graphite, followed by a layer
of metallic silver, which provides a conductive surface
between the pellet and the can in which it will be enclosed.
After assembly, the capacitors are tested and inspected to
assure long life and reliability. It offers excellent reliability
and high stability for consumer and commercial electronics
with the added feature of low cost.
Surface mount designs of “Solid Tantalum” capacitors use
lead frames or lead frameless designs as shown in the
accompanying drawings.
TANTALUM CAPACITORS FOR ALL DESIGN
CONSIDERATIONS
Solid electrolyte designs are the least expensive for a given
rating and are used in many applications where their very
small size for a given unit of capacitance is of importance.
They will typically withstand up to about 10 % of the rated
DC working voltage in a reverse direction. Also important
are their good low temperature performance characteristics
and freedom from corrosive electrolytes.
Vishay Sprague patented the original solid electrolyte
capacitors and was the first to market them in 1956. Vishay
Sprague has the broadest line of tantalum capacitors and
has continued its position of leadership in this field. Data
sheets covering the various types and styles of Vishay
Sprague capacitors for consumer and entertainment
electronics, industry, and military applications are available
where detailed performance characteristics must be
specified.
TYPE 195D, 572D, 591D, 592D/W, 594D,
595D, 695D, T95
TYPE 597D/T97/13008
Cathode Termination
(Silver + Ni/Sn/Plating) Encapsulation
Anode Termination
(Silver + Ni/Sn/Plating)
Sintered Tantalum
Pellet
MnO2 /Carbon/Silver
Coating
Sponge Teflon/Epoxy Tower
Cathode Termination
(Silver + Ni/Sn/Plating) Encapsulation
Anode Termination
(Silver + Ni/Sn/Plating)
Sponge Teflon/Epoxy Tower
Sintered Tantalum
Pellet
MnO2/Carbon/Silver
Coating
Silver Epoxy
TYPE 194D
TYPE T96
TYPE T98
Encapsulation
SnPb or Gold Plated Ni Anode
End Cap Termination
Sponge Teflon
MnO2/Carbon/ Anode Backfill
Silver Coating
Sintered Tantalum
Pellet
Conductive Silver
Epoxy Adhesive
Cathode
Backfill
SnPb or Gold Plated Ni Cathode
End Cap Termination
Cathode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Encapsulation
Anode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Epoxy Tower/
Sponge Teflon
Sintered Tantalum
Pellet
MnO2/Carbon/
Silver Coating
Intermediate
Cathode
Silver
Fuse
Cathode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Encapsulation
Anode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Epoxy Tower/
Sponge Teflon
Sintered Tantalum
Pellet
MnO2/Carbon/
Silver Coating
Intermediate
Cathode
Silver
Fuse
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 3 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
COMMERCIAL PRODUCTS
SOLID TANTALUM CAPACITORS - CONFORMAL COATED
SERIES 592W 592D 591D 595D 594D
PRODUCT IMAGE
TYPE Surface mount TANTAMOUNT? chip, conformal coated
FEATURES
Low profile, robust
design for use in
pulsed applications
Low profile,
maximum CV
Low profile, low ESR,
maximum CV Maximum CV Low ESR,
maximum CV
TEMPERATURE
RANGE
- 55 °C to + 125 °C
(above 40 °C, voltage
deratig is required)
- 55 °C to + 125 °C (above 85 °C, voltage derating is required)
CAPACITANCE
RANGE 330 μF to 2200 μF 1 μF to 2200 μF 1 μF to 1500 μF 0.1 μF to 1500 μF 1 μF to 1500 μF
VOLTAGE RANGE 6 V to 10 V 4 V to 50 V 4 V to 50 V 4 V to 50 V 4 V to 50 V
CAPACITANCE
TOLERANCE ± 20 % ± 10 %, ± 20 % ± 10 %, ± 20 % ± 10 %, ± 20 % ± 10 %, ± 20 %
LEAKAGE
CURRENT 0.01 CV or 0.5 μA, whichever is greater
DISSIPATION
FACTOR 14 % to 45 % 4 % to 50 % 4 % to 50 % 4 % to 20 % 4 % to 20 %
CASE CODES C, M, X S, A, B, C, D, R, M, X A, B, C, D, R, M T, S, A, B, C,
D, G, M, R B, C, D, R
TERMINATION 100 % matte tin 100 % matte tin standard, tin/lead and gold plated available
SOLID TANTALUM CAPACITORS - CONFORMAL COATED
SERIES 597D 572D 695D 195D 194D
PRODUCT IMAGE
TYPE TANTAMOUNT? chip, conformal coated
FEATURES
Ultra low ESR,
maximum CV,
multi-anode
Low profile,
maximum CV
Pad compatible with
194D and CWR06
US and European
case sizes
Industrial version of
CWR06/CWR16
TEMPERATURE
RANGE - 55 °C to + 125 °C (above 85 °C, voltage derating is required)
CAPACITANCE
RANGE 10 μF to 1500 μF 2.2 μF to 220 μF 0.1 μF to 270 μF 0.1 μF to 330 μF 0.1 μF to 330 μF
VOLTAGE RANGE 4 V to 75 V 4 V to 35 V 4 V to 50 V 2 V to 50 V 4 V to 50 V
CAPACITANCE
TOLERANCE ± 10 %, ± 20 %
LEAKAGE
CURRENT 0.01 CV or 0.5 μA, whichever is greater
DISSIPATION
FACTOR 6 % to 20 % 6 % to 26 % 4 % to 8 % 4 % to 8 % 4 % to 10 %
CASE CODES V, D, E, R, F, Z, M, H P, Q, S, A, B, T A, B, D, E, F, G, H C, S, V, X, Y, Z, R,
A, B, D, E, F, G, H A, B, C, D, E, F, G, H
TERMINATION
100 % matte tin
standard, tin/lead
solder plated
available
100 % matte tin
standard, gold plated
available
100 % matte tin standard,
tin/lead and gold plated available
Gold plated standard;
tin/lead solder plated
and hot solder
dipped available
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 4 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HIGH RELIABILITY PRODUCTS
SOLID TANTALUM CAPACITORS - CONFORMAL COATED
SERIES CWR06 CWR16 CWR26 13008
PRODUCT IMAGE
TYPE TANTAMOUNT? chip, conformal coated
FEATURES MIL-PRF-55365/4
qualified
MIL-PRF-55365/13
qualified
MIL-PRF-55365/13
qualified DLA approved
TEMPERATURE RANGE - 55 °C to + 125 °C (above 85 °C, voltage derating is required)
CAPACITANCE RANGE 0.10 μF to 100 μF 0.33 μF to 330 μF 10 μF to 100 μF 10 μF to 1500 μF
VOLTAGE RANGE 4 V to 50 V 4 V to 35 V 15 V to 35 V 4 V to 63 V
CAPACITANCE TOLERANCE ± 5 %, ± 10 %,
± 20 %
± 5 %, ± 10 %,
± 20 %
± 5 %, ± 10 %,
± 20 % ± 10 %, ± 20 %
LEAKAGE CURRENT 0.01 CV or 1.0 μA, whichever is greater 0.01 CV or 0.5 μA,
whichever is greater
DISSIPATION FACTOR 6 % to 10 % 6 % to 10 % 6 % to 12 % 6 % to 20 %
CASE CODES A, B, C, D, E, F, G, H A, B, C, D, E, F, G, H F, G, H V, E, F, R, Z, D, M, H, N
TERMINATION Gold plated; tin/lead; tin/lead solder fused Tin/lead
SOLID TANTALUM CAPACITORS - CONFORMAL COATED
SERIES T95 T96 T97 T98
PRODUCT IMAGE
TYPE TANTAMOUNT? chip, Hi-Rel COTS, conformal coated
FEATURES High reliability High reliability,
built in fuse
High reliability,
ultra low ESR,
multi-anode
High reliability,
ultra low ESR, built in
fuse, multi-anode
TEMPERATURE RANGE - 55 °C to + 125 °C (above 85 °C, voltage derating is required)
CAPACITANCE RANGE 0.15 μF to 680 μF 10 μF to 680 μF 10 μF to 1500 μF 10 μF to 1500 μF
VOLTAGE RANGE 4 V to 50 V 4 V to 50 V 4 V to 75 V 4 V to 75 V
CAPACITANCE TOLERANCE ± 10 %, ± 20 % ± 10 %, ± 20 % ± 10 %, ± 20 % ± 10 %, ± 20 %
LEAKAGE CURRENT 0.01 CV or 0.5 μA, whichever is greater
DISSIPATION FACTOR 4 % to 14 % 6 % to 14 % 6 % to 20 % 6 % to 10 %
CASE CODES A, B, C, D, R, S, V, X, Y, Z R V, E, F, R, Z, D, M, H, N V, E, F, R, Z, M, H
TERMINATION 100 % matte tin, tin/lead
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 5 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
? Metric dimensions will govern. Dimensions in inches are rounded and for reference only.
(1) A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and/or the body
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°.
(2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.
(3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less.
(4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less.
(5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. Dimensions of
embossement location shall be applied independent of each other.
(6) B1 dimension is a reference dimension tape feeder clearance only.
TAPE AND REEL PACKAGING in inches [millimeters]
Tape and reel specifications: All case sizes are
available on plastic embossed tape per EIA-481.
Standard reel diameter is 7" (178 mm).
Lengthwise orientation at capacitors in tape
0.004 [0.10]
max.
K0
T2
(max.)
B1 (max.) (6)
0.024
[0.600]
max.
10 pitches cumulative
toler ance on tape
± 0.008 [0.200]
Embossment
0.069 ± 0.004
[1.75 ± 0.10]
D1 (min.) for components
0.079 x 0.047 [2.0 x 1.2] and l.arger (5)
Maximum
USER DIRECTION
OF FEED
Center lines
of cavity
A0
P1
F W
0.030 [0.75]
min. (3)
0.030 [0.75]
min. (4)
0.079 ± 0.002
[2.0 ± 0.05]
0.157 ± 0.004
[4.0 ± 0.10]
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
B0
Maximum
component
rotation
(Side or front sectional view)
20°
For tape feeder
reference only
including draft.
Concentric around B0
Deformation
between
embossments
Top
cover
tape
Top
cover
tape
cavity size
(1)
DIRECTION OF FEED
Cathode (-)
Anode (+)
Bending radius (2)
R minimum:
8 mm = 0.984" (25 mm)
12 mm and 16 mm = 1.181" (30 mm)
R
min.
20° maximum
component rotation
Typical
component
cavity
center line
Typical
component
A0 center line
B0
(Top view)
0.9843 [250.0]
Tape
3.937 [100.0]
0.039 [1.0]
max.
0.039 [1.0]
max.
Camber
Allowable camber to be 0.039/3.937 [1/100]
(Top view)
Non-cumulative over 9.843 [250.0]
DIRECTION OF FEED
Cathode (-)
Anode (+)
H-Case only
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 6 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CARRIER TAPE DIMENSIONS in inches [millimeters]
TAPE WIDTH W D0 P2 F E1 E2 min.
8 mm
0.315
+ 0.012/- 0.004
[8.0 + 0.3/- 0.1]
0.059
+ 0.004/- 0
[1.5 + 0.1/- 0]
0.078 ± 0.0019
[2.0 ± 0.05]
0.14 ± 0.0019
[3.5 ± 0.05]
0.324 ± 0.004
[1.75 ± 0.1]
0.246
[6.25]
12 mm
0.479
+ 0.012/- 0.004
[12.0 + 0.3/- 0.1]
0.216 ± 0.0019
[5.5 ± 0.05]
0.403
[10.25]
16 mm
0.635
+ 0.012/- 0.004
[16.0 + 0.3/- 0.1] 0.078 ± 0.004
[2.0 ± 0.1]
0.295 ± 0.004
[7.5 ± 0.1]
0.570
[14.25]
24 mm 0.945 ± 0.012
[24.0 ± 0.3]
0.453 ± 0.004
[11.5 ± 0.1]
0.876
[22.25]
CARRIER TAPE DIMENSIONS in inches [millimeters]
TYPE CASE CODE
TAPE WIDTH
W
IN mm
P1 K0 max. B1 max.
592D?
592W?
591D
A 8 0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.149 [3.78]
B 12 0.088 [2.23] 0.166 [4.21]
C 12
0.315 ± 0.004
[8.0 ± 0.10]
0.088 [2.23] 0.290 [7.36]
D 12 0.088 [2.23] 0.300 [7.62]
M 16 0.091 [2.30] 0.311 [7.90]
R 12 0.088 [2.23] 0.296 [7.52]
S 8 0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.139 [3.53]
T 12 0.088 [2.23] 0.166 [4.21]
X 24 0.472 ± 0.004
[12.0 ± 0.10] 0.011 [2.72] 0.594 [15.1]
595D?
594D
A 8 0.157 ± 0.004
[4.0 ± 0.10]
0.063 [1.60] 0.152 [3.86]
B 12 0.088 [2.23] 0.166 [4.21]
C 12
0.315 ± 0.004
[8.0 ± 0.10]
0.118 [2.97] 0.290 [7.36]
D 12 0.119 [3.02] 0.296 [7.52]
G 12 0.111 [2.83] 0.234 [5.95]
H 12 0.098 [2.50] 0.232 [5.90]
M 12 0.157 ± 0.004
[4.0 ± 0.10] 0.085 [2.15] 0.152 [3.85]
R 12 0.315 ± 0.004
[8.0 ± 0.10] 0.148 [3.78] 0.296 [7.52]
S 8 0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.149 [3.78]
T 8 0.054 [1.37] 0.093 [2.36]
695D
A 8
0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.139 [3.53]
B 12 0.059 [1.50] 0.189 [4.80]
D 12 0.063 [1.62] 0.191 [4.85]
E 12 0.074 [1.88] 0.239 [6.07]
F 12 0.315 ± 0.004
[8.0 ± 0.10] 0.075 [1.93] 0.259 [6.58]
G 12 0.157 ± 0.004
[4.0 ± 0.10] 0.109 [2.77] 0.301 [7.65]
H 16 0.315 ± 0.004
[8.0 ± 0.10] 0.124 [3.15] 0.31 [7.87]
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 7 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) H case only, packaging code T: Lengthwise orientation at capacitors in tape.
195D
A 8
0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.139 [3.53]
B 12 0.059 [1.50] 0.189 [4.80]
C 8 0.054 [1.37] 0.093 [2.36]
D 12 0.067 [1.70] 0.179 [4.55]
E 12 0.074 [1.88] 0.239 [6.07]
F 12 0.315 ± 0.004
[8.0 ± 0.10] 0.076 [1.93] 0.259 [6.58]
G 12 0.157 ± 0.004
[4.0 ± 0.10] 0.109 [2.77] 0.301 [7.65]
H (1) 12 0.472 ± 0.004
[12.0 ± 0.1] 0.122 [3.11] 0.163 [4.14]
R 12 0.315 ± 0.004
[8.0 ± 0.10] 0.149 [3.78] 0.296 [7.52]
S 8
0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.149 [3.78]
V 8 0.060 [1.52] 0.150 [3.80]
X 12 0.069 [1.75] 0.296 [7.52]
Y 12 0.089 [2.26] 0.296 [7.52]
Z 12 0.114 [2.89] 0.288 [7.31]
572D
A 8
0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.149 [3.78]
B 12 0.087 [2.20] 0.166 [4.21]
P 8 0.043 [1.10] 0.102 [2.60]
P 8 0.052 [1.32] 0.106 [2.70]
Q 8 0.054 [1.37] 0.140 [3.55]
S 8 0.058 [1.47] 0.149 [3.78]
T 12 0.061 [1.55] 0.164 [4.16]
194D?
CWR06?
CWR16?
CWR26
A 8
0.157 ± 0.004
[4.0 ± 0.10]
0.069 [1.75] 0.139 [3.53]
B 12 0.073 [1.85] 0.189 [4.80]
C 12 0.069 [1.75] 0.244 [6.20]
D 12 0.068 [1.72] 0.191 [4.85]
E 12 0.074 [1.88] 0.239 [6.07]
F 12
0.315 ± 0.004
[8.0 ± 0.10]
0.091 [2.31] 0.262 [6.65]
G 16 0.134 [3.40] 0.289 [7.34]
H 16 0.129 [3.28] 0.319 [8.10]
597D?
T97?
13008
D 16 0.317 ± 0.004
[8.0 ± 0.10]
0.150 [3.80] 0.313 [7.95]
E 16 0.173 [4.40] 0.343 [8.70]
F 16
0.476 ± 0.004
[12.0 ± 0.1]
0.205 [5.20] 0.309 [7.85]
H 16 0.224 [5.70] 0.313 [7.95]
M 16 0.193 [4.90] 0.339 [8.60]
N 16 0.283 [7.20] 0.323 [8.20]
R 16 0.159 [4.05] 0.313 [7.95]
V 12 0.317 ± 0.004
[8.0 ± 0.10] 0.088 [2.23] 0.300 [7.62]
Z 16 0.476 ± 0.004
[12.0 ± 0.1] 0.239 [6.06] 0.311 [7.90]
T95
A 8
0.157 ± 0.004
[4.0 ± 0.10]
0.063 [1.60] 0.152 [3.86]
B 12 0.088 [2.23] 0.166 [4.21]
C 12 0.117 [2.97] 0.290 [7.36]
D 12 0.317 ± 0.004
[8.0 ± 0.10]
0.119 [3.02] 0.296 [7.52]
R 12 0.149 [3.78] 0.296 [7.52]
S 8
0.157 ± 0.004
[4.0 ± 0.10]
0.058 [1.47] 0.149 [3.78]
V 8 0.060 [1.52] 0.150 [3.80]
X 12 0.069 [1.75] 0.296 [7.52]
Y 12 0.089 [2.26] 0.296 [7.52]
Z 12 0.114 [2.89] 0.288 [7.31]
T96 R 16 0.476 ± 0.004
[12.0 ± 0.1] 0.159 [4.05] 0.313 [7.95]
T98
F 16
0.476 ± 0.004
[12.0 ± 0.1]
0.239 [6.06] 0.311 [7.90]
M 16 0.193 [4.90] 0.339 [8.60]
Z 16 0.272 [6.90] 0.307 [7.80]
CARRIER TAPE DIMENSIONS in inches [millimeters]
TYPE CASE CODE
TAPE WIDTH
W
IN mm
P1 K0 max. B1 max.
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 8 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAD DIMENSIONS in inches [millimeters]
CASE CODE WIDTH (A) PAD METALLIZATION (B) SEPARATION (C)
592D/W - 591D
A 0.075 [1.9] 0.050 [1.3] 0.050 [1.3]
B 0.118 [3.0] 0.059 [1.5] 0.059 [1.5]
C 0.136 [3.5] 0.090 [2.3] 0.122 [3.1]
D 0.180 [4.6] 0.090 [2.3] 0.134 [3.4]
M 0.256 [6.5]
Anode pad: 0.095 [2.4]
0.138 [3.5]
Cathode pad: 0.067 [1.7]
R 0.240 [6.1]
Anode pad: 0.095 [2.4]
0.118 [3.0]
Cathode pad: 0.067 [1.7]
S 0.067 [1.7] 0.032 [0.8] 0.043 [1.1]
X 0.310 [7.9] 0.120 [3.0] 0.360 [9.2]
595D - 594D
T 0.059 [1.5] 0.028 [0.7] 0.024 [0.6]
S 0.067 [1.7] 0.032 [0.8] 0.043 [1.1]
A 0.820 [2.1] 0.050 [1.3] 0.050 [1.3]
B 0.118 [3.0] 0.059 [1.5] 0.059 [1.5]
C 0.136 [3.5] 0.090 [2.3] 0.122 [3.1]
D 0.180 [4.6] 0.090 [2.3] 0.134 [3.4]
G 0.156 [4.05] 0.090 [2.3] 0.082 [2.1]
M 0.110 [2.8] 0.087 [2.2] 0.134 [3.4]
R 0.248 [6.3] 0.090 [2.3] 0.140 [3.6]
195D
A 0.067 [1.7] 0.043 [1.1] 0.028 [0.7]
B 0.063 [1.6] 0.047 [1.2] 0.047 [1.2]
C 0.059 [1.5] 0.031 [0.8] 0.024 [0.6]
D 0.090 [2.3] 0.055 [1.4] 0.047 [1.2]
E 0.090 [2.3] 0.055 [1.4] 0.079 [2.0]
F 0.140 [3.6] 0.063 [1.6] 0.087 [2.2]
G 0.110 [2.8] 0.059 [1.5] 0.126 [3.2]
H 0.154 [3.9] 0.063 [1.6] 0.140 [3.6]
N 0.244 [6.2] 0.079 [2.0] 0.118 [3.0]
R 0.248 [6.3] 0.090 [2.3] 0.140 [3.6]
S 0.079 [2.0] 0.039 [1.0] 0.039 [1.0]
V 0.114 [2.9] 0.039 [1.0] 0.039 [1.0]
X 0.118 [3.0] 0.067 [1.7] 0.122 [3.1]
Y 0.118 [3.0] 0.067 [1.7] 0.122 [3.1]
Z 0.118 [3.0] 0.067 [1.7] 0.122 [3.1]
A
C
B
B
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 9 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR06/CWR16/CWR26 - 194D - 695D
A 0.065 [1.6] 0.50 [1.3] 0.040 [1.0]
B 0.065 [1.6] 0.70 [1.8] 0.055 [1.4]
C 0.065 [1.6] 0.70 [1.8] 0.120 [3.0]
D 0.115 [2.9] 0.70 [1.8] 0.070 [1.8]
E 0.115 [2.9] 0.70 [1.8] 0.120 [3.0]
F 0.150 [3.8] 0.70 [1.8] 0.140 [3.6]
G 0.125 [3.2] 0.70 [1.8] 0.170 [4.3]
H 0.165 [4.2] 0.90 [2.3] 0.170 [4.3]
T95
B 0.120 [3.0] 0.059 [1.5] 0.059 [1.5]
C 0.136 [3.5] 0.090 [2.3] 0.120 [3.1]
D 0.180 [4.6] 0.090 [2.3] 0.136 [3.47]
R 0.248 [6.3] 0.090 [2.3] 0.140 [3.6]
S 0.080 [2.03] 0.040 [1.02] 0.040 [1.02]
V 0.114 [2.9] 0.040 [1.02] 0.040 [1.02]
X, Y, Z 0.114 [2.9] 0.065 [1.65] 0.122 [3.1]
T96
R 0.248 [6.3] 0.090 [2.3] 0.140 [3.6]
597D - T97 - T98 - 13008
D, E, V 0.196 [4.9] 0.090 [2.3] 0.140 [3.6]
F, R, Z 0.260 [6.6] 0.090 [2.3] 0.140 [3.6]
M, H, N 0.284 [7.2] 0.090 [2.3] 0.140 [3.6]
PAD DIMENSIONS in inches [millimeters]
CASE CODE WIDTH (A) PAD METALLIZATION (B) SEPARATION (C)
A
C
B
B
PAD DIMENSIONS in inches [millimeters]
CASE CODE WIDTH (A) PAD METALLIZATION (B) PAD METALLIZATION (B1) SEPARATION (C)
572D
A 0.079 [2.0] 0.039 [1.0] 0.035 [0.9] 0.047 [1.2]
Q 0.079 [2.0] 0.039 [1.0] 0.035 [0.9] 0.047 [1.2]
S 0.079 [2.0] 0.039 [1.0] 0.035 [0.9] 0.047 [1.2]
B 0.110 [2.8] 0.039 [1.0] 0.035 [0.9] 0.055 [1.4]
P 0.055 [1.4] 0.024 [0.6] 0.024 [0.6] 0.035 [0.9]
T 0.110 [2.8] 0.035 [0.9] 0.031 [0.8] 0.055 [1.4]
A
C
B
B1
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 10 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RECOMMENDED REFLOW PROFILES
Capacitors should withstand Reflow profile as per J-STD-020 standard
PROFILE FEATURE SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY
Preheat/soak
Temperature min. (Ts min.) 100 °C 150 °C
Temperature max. (Ts max.) 150 °C 200 °C
Time (ts) from (Ts min. to Ts max.) 60 s to 120 s 60 s to 120 s
Ramp-up
Ramp-up rate (TL to Tp) 3 °C/s max. 3 °C/s max.
Liquidous temperature (TL) 183 °C 217 °C
Time (tL) maintained above TL 60 s to 150 s 60 s to 150 s
Peak package body temperature (Tp) Depends on type and case – see table below
Time (tp)* within 5 °C of the specified?
classification temperature (Tc) 20 s 30 s
Ramp-down
Ramp-down rate (Tp to TL) 6 °C/s max. 6 °C/s max.
Time 25 °C to peak temperature 6 min max. 8 min max.
25
TEMPERATURE (°C)
TIME (s)
ts
tL
Time 25 °C to peak
TL
Tp Tc = 5 °C
tp
Ts max.
Ts min.
Preheat area
Max. ramp-up rate = 3 °C/s
Max. ramp-down rate = 6 °C/s
PEAK PACKAGE BODY TEMPERATURE (Tp)
TYPE/CASE CODE
PEAK PACKAGE BODY TEMPERATURE (Tp)
SnPb EUTECTIC PROCESS LEAD (Pb)-FREE PROCESS
591D/592D - all cases, except X25H, M and R cases 235 °C 260 °C
591D/592D - X25H, M and R cases 220 °C 250 °C
594D/595D - all cases except C, D and R 235 °C 260 °C
594D/595D - C, D and R case 220 °C 250 °C
572D all cases n/a 260 °C
T95 B, S, V, X, Y cases 235 °C 260 °C
T95 C, D, R and Z cases 220 °C 250 °C
T96 R case 220 °C 250 °C
195D all cases, except G, H, R and Z 235 °C 260 °C
195D G, H, R and Z cases 220 °C 250 °C
695D all cases, except G and H cases 235 °C 260 °C
695D G, H cases 220 °C 250 °C
597D, T97, T98 all cases, except V case 220 °C 250 °C
597D, T97, T98 V case 230 °C 260 °C
194D all cases, except H and G cases 235 °C 260 °C
194D H and G cases 220 °C 250 °C
Conformal Coated Guide
www.vishay.com Vishay Sprague
Revision: 23-Jul-13 11 Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GUIDE TO APPLICATION
1. AC Ripple Current: The maximum allowable ripple
current shall be determined from the formula:
where,
P = Power dissipation in W at + 25 °C as given in
the tables in the product datasheets (Power
Dissipation).
RESR = The capacitor equivalent series resistance at
the specified frequency
2. AC Ripple Voltage: The maximum allowable ripple
voltage shall be determined from the formula:
or, from the formula:
where,
P = Power dissipation in W at + 25 °C as given in
the tables in the product datasheets (Power
Dissipation).
RESR = The capacitor equivalent series resistance at
the specified frequency
Z = The capacitor impedance at the specified
frequency
2.1 The sum of the peak AC voltage plus the applied DC
voltage shall not exceed the DC voltage rating of the
capacitor.
2.2 The sum of the negative peak AC voltage plus the
applied DC voltage shall not allow a voltage reversal
exceeding 10 % of the DC working voltage at
+ 25 °C.
3. Reverse Voltage: Solid tantalum capacitors are not
intended for use with reverse voltage applied.
However, they have been shown to be capable of
withstanding momentary reverse voltage peaks of up
to 10 % of the DC rating at 25 °C and 5 % of the DC
rating at + 85 °C.
4. Temperature Derating: If these capacitors are to be
operated at temperatures above + 25 °C, the
permissible RMS ripple current or voltage shall be
calculated using the derating factors as shown:
5. Power Dissipation: Power dissipation will be
affected by the heat sinking capability of the
mounting surface. Non-sinusoidal ripple current may
produce heating effects which differ from those
shown. It is important that the equivalent IRMS value
be established when calculating permissible
operating levels. (Power dissipation calculated using
derating factor (see paragraph 4)).
6. Attachment:
6.1 Soldering: Capacitors can be attached by
conventional soldering techniques, convection,
infrared reflow, wave soldering and hot plate
methods. The soldering profile chart shows typical
recommended time/temperature conditions for
soldering. Preheating is recommended to reduce
thermal stress. The recommended maximum preheat
rate is 2 °C/s. Attachment with a soldering iron is not
recommended due to the difficulty of controlling
temperature and time at temperature. The soldering
iron must never come in contact with the capacitor.
7. Recommended Mounting Pad Geometries: The
nib must have sufficient clearance to avoid electrical
contact with other components. The width
dimension indicated is the same as the maximum
width of the capacitor. This is to minimize lateral
movement.
8. Cleaning (Flux Removal) After Soldering:
TANTAMOUNT? capacitors are compatible with all
commonly used solvents such as TES, TMS, Prelete,
Chlorethane, Terpene and aqueous cleaning media.
However, CFC/ODS products are not used in the
production of these devices and are not
recommended. Solvents containing methylene
chloride or other epoxy solvents should be avoided
since these will attack the epoxy encapsulation
material.
TEMPERATURE DERATING FACTOR
+ 25 °C 1.0
+ 85 °C 0.9
+ 125 °C 0.4
IRMS
P
RESR
= ------------
VRMS IRMS = x Z
VRMS Z P
RESR
= ------------
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1 Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
592D108X06R3X2T-X 592D226X9020R2T15H 592D106X0025R2T15H 592D106X9016C2T15H
592D106X9035R2T15H 592D107X9016D2T20H 592D107X96R3R2T15H 592D108X06R3X2T20H
592D155X9035B2T15H 592D156X9020C2T15H 592D335X9035D2T15H 592D336X9016R2T15H
592D337X0010R2T20H 592D475X0020B2T15H 592D476X9016R2T15H 592D686X0010B2T20H
592D476X0010C2T 592D108X96R3X2T20H 592D336X9010D2T15H 592D226X9016D2T15H
592D685X9020C2T15H 592D476X06R3C2T15H 592D227X96R3D2T20H 592D106X9010B8T15H
592D156X06R3B2T15H 592D106X0035R2T15H 592D106X9010B2T15H 592D477X96R3R2T20H
592D228X96R3X2T20H 592D158X96R3X2T25H 592D338X96R3X2T25H 592D108X06R3R2T20H
592D108X96R3R2T20H 592D475X9035R2T15H 592D105X9035B2W15H 592D106X0004A2T15H
592D106X0010B2T15H 592D106X0016C2W15H 592D106X0020B2T15H 592D106X9010A2T15H
592D106X9010B2W15H 592D106X9020B2T15H 592D107X0010U2T20H 592D107X0016V2T20H
592D107X9016V2T20H 592D156X0016D2T15H 592D156X0025R2T15H 592D156X9016D2T15H
592D156X9020R2T15H 592D156X9025R2T15H 592D157X0010U2T20H 592D157X06R3U2T20H
592D158X0004X2T20H 592D158X9004X2W20H 592D158X96R3Y2T20H 592D225X0025A2T15H
592D225X9035C2T15H 592D226X0010B2T15H 592D226X0016C2T15H 592D226X0016C2W15H
592D226X0016D2T15H 592D226X0020D2T15H 592D226X9004B2T15H 592D226X9010C2W15H
592D226X9016C2T15H 592D226X9016C2W15H 592D226X9020T2T20H 592D227X0004U2T20H
592D227X0010V2T20H 592D227X0010W2T20H 592D227X06R3U2T20H 592D227X9004U2T20H
592D227X9010W2T20H 592D227X96R3R2T15H 592D228X0004Y2W20H 592D228X9004Y2T25H
592D228X9004Y2W20H 592D335X0025B2T15H 592D335X0035D2T15H 592D335X9025B2T15H
592D336X0010D2W15H 592D336X0016R2T15H 592D336X0016T2T20H 592D336X9016T2T20H
592D336X96R3B2T15H 592D337X06R3V2T20H 592D337X9004V2T15H 592D337X96R3W2T20H
592D475X0020A2T15H 592D475X0025C2T15H 592D475X0035R2T15H 592D475X9020A2T15H
592D475X9020B2T15H 592D475X9025C2T15H 592D476X0010R2T15H 592D476X0010T2T20H
592D476X9004C2T15H 592D476X9010T2T20H 592D476X96R3B2T15H 592D476X96R3D2T15H